PDA

View Full Version : practice 12 guage


shonn
10-10-2007, 06:39 PM
Well here is my most recent project a 12 gauge single shotgun that my father had laying around in his car garage it was very rusty and pitted with rust took me some time to just sand it down and get it fairly smooth to even start the process. After doing my smoke pull I started drawing out my design (by hand) but I have learned that I should use my computer more my lines are not as even as I would have liked them to be. Even though this is my first shot gun I have ever engraved on, with the different curves and fun obstacles I really did learn a lot on what next I need to do when I do my next gun,
For one thing I cut my outlines way too deep and that caused problems later on when I removed the back ground my outlines where either to thick or to thin, and I think my scroll heads are too thick and I will need to make adjustments next time I draw them out, I plan on using my adobe illustrator more for the lines to be more even. I did like the shading and I got much better at it on the second side (the side without the name “sears on it”) here is some pics of the process that I went through, the only problem is I didn’t take pitchers of it when it was very rusty to show you what had to be done to get it ½ way shiny.
I added some gun blueing at the end to give it more of a old look and it kinda took some of the luster away from it I don’t know if I like it with the blueing or not( I can always take it off later I suppose) and with my pitchers I can see more of my shading mistakes but practice like this will only help to improve the skills .http://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/1.jpg

http://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/2.jpg

http://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/3.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/4.jpg

http://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/5.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/7.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/9.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/10.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/11.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/12.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/14.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/15.jpg

http://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/16.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/17.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/18.jpghttp://i159.photobucket.com/albums/t126/shonnpaul/engraving2007/19.jpg
this was very fun to do. maybe after 10 more years of doing it the work i am turning out will be more like yours.

or i can think of it this way for all you new people to engraving this will make you feel better :lol: it is hard to compare work with others that have been doing engraving for most all of there life.

Zernike Au
10-10-2007, 07:47 PM
No!! Your works are excellent! I can see how you willing share your experience with others and I can see your works are full of love! That's the most beautiful art in the world. It is far better than the works of those very famous engraver who said "I cannot help you anymore" to a newbie like me!!! I was really frustrated seriously when hearing such words!!!

I enjoy so much and learn a lot in your step by step photos. I don't have a gun to engrave but I will try, at least many many sketches......Thanks.
Please keep post your good works.
:hurray: :hurray: :hurray:

Zernike

shonn
10-10-2007, 08:53 PM
Thank you I am happy you liked it !

I was worried I posted too many pitchers. I seem to learn more when people use pitchers more. I am looking forward to doing more items. I will share what I finish . I am glad that every one on this forum are always positive and willing to help out.
I am always open to suggestions on how to improve my engraving or design work if you have any. Please feel free to help me out .
I know after I draw a design I wait like 4 days and look at it upside down and backwards and forwards and make adjustments all the time so if you see things I don’t great please share.
Thank you.

Zernike Au
10-10-2007, 10:22 PM
I can notice that your curve are not very smooth. You may need a rather longer time in sitting in front of the computer to use the Illustrator to smooth the curves but after you small them all, you will find they are all very dull mechanical curve!!!

My hand shake seriously so I cannot draw good curve as well but I found everytime before I draw anything, I draw freehand circle for many times, maybe drawing the same circle for 5 minutes, clockwise and then counter-clockwise, I move my whole arm without tilt or twist my wrist, and my finger also no action, then I can have a good warm up, and then when I draw the curve, it can be better....
Recently I read some books about penmenship for studying the lettering engraving, they call this "drill exercise" which really can help to improve the quality of the curves, both in handwriting, drawing or designing the scrolls... hope you can find it useful.

zernike

Rich Hambrook
10-11-2007, 06:07 AM
Very nice work my friend. I don't know how you can say it is a "practice gun". I would be very proud of it as I am sure you are. We all learn everyday. The day we stop learning is the day we believe we know it all and don't learn from "beginners". Beautiful job and I can't wait to see the next one!
Rich:iagree: :willy_nilly:

Ray Cover
10-11-2007, 07:41 AM
Your work is coming along nicely shonn. well done

Ray