Ngraver liners

[Gail]

I have some Ngraver liners. They come with a 1/8" shank. Am I correct in thinking 1/8" shank is OK to use in my palm control.
Thanks for reply.

[Steve Lindsay]

Hi Gail, The tool hole in the nose of the airgraver is .133" in diameter. Sny shank that will fit that will work. So if the shank is 1/8" round it will fit. If it is 1/8" square it will not fit. Chamfer the end of the shank a little before inserting so it doesn't catch on the nose oring.