View Full Version : Kit for knifemaker
Laguiole
03-12-2012, 08:21 AM
Hello, I'm knifemaker and I would like to add engraving on my knives, do the following list is good for me
Foot Control Classic or NitroG20™ engraving set w/ sharpener
Classic handpiece or NitroG20 (your choice)
Dual Regulators with Foot Control
Tungsten Dead blow piston
CarbaltXD graver blanks 5 pack
M42 graver blanks 5 pack
Lindsay Sharpener set with basic templates, Includes: Sharpening fixture, 6"x6' sharpening base, four diamond bench stones (260, 600, 1200, 2000), plus 4 templates: Universal, Detailing, 105, and Flat & Knife Combo
I have microscope and compressor.
What is the best for me Classic or Nitro ?
Bulino template which you advise me to create scene ?
Ball vise which one to choose if needed so the knives ?
Sorry for my english and thank you.
mrthe
03-12-2012, 08:29 AM
I think that if you have to engrave knifes ,the classic handpiece is a perfect choice,the nitro maybe is more helpfull to engrave more bigger items like motorcicles parts,or heavy sculpting.
Laguiole
03-12-2012, 08:35 AM
thanks mrthe I appreciate
This for make engraving, gold inlay and bulino job on my knives..
regards
mrthe
03-12-2012, 08:44 AM
http://www.airgraver.com/Air%20Engraver%20NitroG20.htm maybe this link and the video can help you,but i think that if is for knife engraving with the classic you will have the right tool ;)
macsalvi
03-12-2012, 09:29 AM
Let me recomend you to buy the Knifemaker Contour Vise
http://www.knifemaking.com/product-p/pv622.htm
Laguiole
03-12-2012, 10:14 AM
Thanks
Yes I have this vise, beings may be installed on the ball vise
SEngraver
03-12-2012, 12:33 PM
Hello, I'm knifemaker and I would like to add engraving on my knives, do the following list is good for me
Foot Control Classic or NitroG20™ engraving set w/ sharpener
Classic handpiece or NitroG20 (your choice)
Dual Regulators with Foot Control
Tungsten Dead blow piston
CarbaltXD graver blanks 5 pack
M42 graver blanks 5 pack
Lindsay Sharpener set with basic templates, Includes: Sharpening fixture, 6"x6' sharpening base, four diamond bench stones (260, 600, 1200, 2000), plus 4 templates: Universal, Detailing, 105, and Flat & Knife Combo
I have microscope and compressor.
What is the best for me Classic or Nitro ?
Bulino template which you advise me to create scene ?
Ball vise which one to choose if needed so the knives ?
Sorry for my english and thank you.
Hi Laguiole,
I agree with Mrthe,the classic would be a good choice since you are also getting the tungsten piston.
Actually choose the classic with this kit ;
http://www.airgraver.com/Hand_Engraving_Tools_Overview.htm#Engraving%20Sets
For bulino you can use both the P.Coggan point/ template and the V70 - green template.
http://www.engravingschool.com/forum-pics/nine%20templates-for%20web.jpg
You will also find the R.Baptiste stippling point very useful ;
http://www.airgraver.com/images/stipple-engraving-templates.jpg
All the best
SE:yo[1]:
rbaptiste
03-14-2012, 01:57 PM
Salut Laguiole, je suppose que je vise juste pour la langue ;-)
Pour les couteaux, pas besoin du G20 le classique et le piston en tungstène c'est assez.
Pour l'affûtage des pointes en carbure, il est impératif de prendre l'affûteur de TW
Pour le reste du matériel, tu as eu les réponses ;-)
Laguiole
03-16-2012, 04:17 PM
Merci M. Baptiste
Et oui, un québécois qui désire se lancer en gravure....
rbaptiste
03-27-2012, 09:54 AM
Et oui, un québécois qui désire se lancer en gravure....
Il y en a déjà deux qui sont venu chez moi mais deux anglophones ;-)
Laguiole
04-05-2012, 02:02 PM
Salut Laguiole, je suppose que je vise juste pour la langue ;-)
Pour les couteaux, pas besoin du G20 le classique et le piston en tungstène c'est assez.
Pour l'affûtage des pointes en carbure, il est impératif de prendre l'affûteur de TW
Pour le reste du matériel, tu as eu les réponses ;-)
Ma commande est passé maintenant, j'ai hâte de m'investir dans le domaine de la gravure. Je n'ai pas demandé le TW pour l'affûtage mais peut-être dans que dans l'avenir je le ferai.
Un back stand peut-il faire le nécessaire aussi pour le dégrossisage des pointes?
Merci M. Baptiste pour les conseils
rbaptiste
04-06-2012, 02:23 AM
Tu veras que le TW pour l'affûtage sera vraiment nécessaire avec les pointes en carbure... également recommandées pour les gravures sur acier "couteau"
Bon travail....
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.