View Single Post
  #8  
Old 08-05-2009, 05:23 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,108
Send a message via Skype™ to Daniel Houwer
Default Re: Lasercopy transfer

Hi Steve,
Have to try that too


Now, why wast good telivision time whenn you can make some pics too

The laser copy, silver plate etc.

Transfer taped onto the plate,

Transfer wetted with nailpolish remover (acetone)

How it looks whenn dry

Soaked and half rubbed away. Dont rubb to hard and wet often.



You can rubb fairly roughly but whenn the rolls of paper get bigger you should rinse. You can damage the transfer by rubbing too much. But if you don't rubb enough the left over paper fibers will be anoying at least Do remind that this is a tip from someone else. I just put photo's to it.
Good luck and hope this helps.

Daniel
__________________
The best things in life are still made by hand.
DaniŽl's Photo Album

Last edited by Daniel Houwer; 08-05-2009 at 05:25 PM. Reason: Forgot a dot
Reply With Quote