Re: Mike Dubber - The Bowen SSA Rod Fixture
hi Mike .. to hold my hammers i use a product called cerasafe . i set the hammer into it and when it hardens i hold it in my vise .
on my inlays i inlay my leafs first , when you under cut the whole scroll you take a chance of destroying the under cut you made on the spine , so i only under cut the leaf first .. here are some photos of how i do it also some photos of the jig i use to hold the ejector tube and barrels . no problem cutting with this jig ..
hey when are you going to come to my shop for a couple of days and show me how you do your raised figure inlays on the recoil shield and i will show you some of my inlay tricks .. give me a call .. ron p
|