Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,732. Welcome to our newest member, Miss Allison
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Lindsay AirGraver Info - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 02-04-2018, 05:36 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default 16 gram CO2 cartridge & PalmControl

I made some new adapters for the current 120psi CO2 regulator. The old co2 regulator from several years ago was around $180 and required a $38 adapter for the 20oz paintball bottles and a little $8 adapter for the 16 vgram threaded cartridge. The new (from several years ago) 120psi CO2 regulator $83 is integrated to work directly on the 20 oz bottles. Unfortunately then we didn't have a way to use the small 16gram cartridges on it. Anyway I finished some adapters that have a probe in them so we can use the small 16 gram cartridges again that need to be pierced.

These are 16 gram cartridges that we used to use as kids in our pellet guns. I updated the site with this adapter. http://www.airgraver.com/CO2.htm



__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #2  
Old 02-08-2018, 06:39 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Re: 16 gram CO2 cartridge & PalmControl

Setup and running more of them, and tried a video.

__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #3  
Old 02-08-2018, 06:45 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Re: 16 gram CO2 cartridge & PalmControl

__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #4  
Old 02-08-2018, 07:37 PM
JJ Roberts's Avatar
JJ Roberts JJ Roberts is offline
Platinum
 
Join Date: Apr 2006
Location: Northern Virginia
Posts: 2,067
Default Re: 16 gram CO2 cartridge & PalmControl

Steve,I'll be at the gun show this weekend using the PC with 20oz CO2 Cartridge I'll post pictures. J.J.
Reply With Quote
  #5  
Old 02-08-2018, 09:09 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Re: 16 gram CO2 cartridge & PalmControl

Great JJ about this weekend. Have a good time! Looking forward to the photos.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #6  
Old 03-14-2018, 04:35 AM
mahargengraver mahargengraver is offline
Copper
 
Join Date: Aug 2013
Location: Holland
Posts: 1
Default Re: 16 gram CO2 cartridge & PalmControl

Steve how long does one of these 16 gram cartridges last approximately when using the PalmControl? greetings Graham.
Reply With Quote
  #7  
Old 03-14-2018, 01:32 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Re: 16 gram CO2 cartridge & PalmControl

Hi Graham, The 16 gram cartridges get around 20 minutes. The 567gram (20oz) around 8 hours. How long they last is dependent what you are doing. i.e. if digging deep background cuts, not as long as shading or outlining.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 10:58 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.