Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 13,809. Welcome to our newest member, AgentAlex
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Antique Engraver's Tools -Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 01-05-2018, 05:01 AM
jwpope jwpope is offline
Copper
 
Join Date: Jan 2018
Location: Massachusetts
Posts: 1
Default Gorton P1-2

Hello Everyone,
Totally new to the forum so I'm sorry if this tread is in the wrong heading.
I was recently given a Gorton P1-2 pantograph which I plan to use to cut Mother of Pearl inlays for musical instruments. Most of my experience is working with woodworking tools so this will be an adventure!
My questions is. Can I convert my tapered shank collect to a straight collect? If not, where could I purchase tapered shank end mills to cut MOP? I also plan to do a small amount of engraving in the distant future.
Many Thanks
Reply With Quote
  #2  
Old 01-05-2018, 10:33 AM
Joe PAonessa Joe PAonessa is offline
Steel
 
Join Date: Mar 2008
Posts: 80
Default Re: Gorton P1-2

I have a Gorton 3-U with the tapered spindle and I use the midget collets that hold a 1/8 inch straight cutter. they show up on E-bay occasionally and work well. The tapered cutters show up on Ebay sometimes as well. I believe I have some of the tapered cutters stashed in the basement that I could let go for a couple bucks a piece. do you have a cutter grinder to sharpen them?
Reply With Quote
  #3  
Old 01-05-2018, 07:17 PM
Roger B2 Roger B2 is offline
Platinum
 
Join Date: Apr 2007
Location: Adelaide, South Australia
Posts: 324
Default Re: Gorton P1-2

Hi,

I have a similar problem with my panto and from what I can make out it might require a new spindle which can involve big money.

For enquiries or parts you could try http://www.pantograph.co.uk/ - I have bought belts and clamps from them in the past.

Let us know how you get on.

Roger
Reply With Quote
  #4  
Old 05-05-2018, 09:52 PM
preachinpilot preachinpilot is offline
Steel
 
Join Date: Jan 2016
Location: sierra vista, az
Posts: 26
Default Re: Gorton P1-2

the taper in the spindle that uses tapered cutters is a brown and sharp #1 taper. Anyone can look up the specs and make some adapter collets. Find a hobby machinest into homeshop machinest stuff.
Reply With Quote
  #5  
Old 05-06-2018, 06:50 AM
JoeJacob JoeJacob is offline
Steel
 
Join Date: Jun 2009
Posts: 87
Default Re: Gorton P1-2

For the instruction and parts manual take a look at:
http://gorton-machine.org/machines/manuals.html
Scroll down to about the middle of the page.
__________________
Joe

If we knew what we were doing, it wouldn't be called research, would it? Albert Einstein
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 01:46 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.