Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 13,566. Welcome to our newest member, R M ENGRAVING
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Tutorials and Contests - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #51  
Old 07-06-2008, 09:29 PM
Joe PAonessa Joe PAonessa is offline
Steel
 
Join Date: Mar 2008
Posts: 78
Default Re: Engraving coining dies

I got back from the ANA summer seminar on Friday and I'm still trying to wind down, but tomorrow I will try to post on the event along with pictures of the dies the five people in the class made. Ya know Tom, I think you are right. I may try carving a patrix for hobbing dies. If it works, it could lead to some better die cutting jobs.

Joe
Reply With Quote
  #52  
Old 07-07-2008, 01:46 PM
Joe PAonessa Joe PAonessa is offline
Steel
 
Join Date: Mar 2008
Posts: 78
Default ANA Summer Seminar Dies

Hi All,

Below is a link to the picture of the dies and a strike from each of them. In the class we cut to size and mounted 5-6 gravers, laid out our designs ( I brought Transfer Magic and everyone was impressed with how it worked), and cut our dies. Mine is in the middle. Because the people from Gallery Mint couldn't make it this year to do our strikings, I brought my jig for hand-hammer striking. no one else wanted to hold the dies while swinging a 4 pound hammer, so I got to strike all 140 pieces we made, lucky me! Anyways, it was a great time and I would like to thank Steve Ellsworth for contacting Dave London for me. Dave brought his Lindsay PC to the class and let all of us play with it. I don't know if it will generate any sales, but there were some very impressed people in the class. Gotta go do that day job thing.

Joe Paonessa

http://i332.photobucket.com/albums/m...a/101_0195.jpg
Reply With Quote
  #53  
Old 06-30-2010, 06:53 PM
Bryan Bridges Bryan Bridges is offline
Copper
 
Join Date: Sep 2008
Posts: 8
Default Re: Engraving coining dies

Hi Tom and all.

My name is Bryan Bridges. I am a die engraver, full time, for nearly fifty years. The major part of my work has been hand engraving,( with hammer and chisel) dies for coining and medallions. I have retired from engraving, but I do teach die engraving, along with most other types of engraving. My classes can be found on Steve Lindsay's web site. Perhaps I could be of some help to those of you who want to learn how to engrave dies and hubs.
Reply With Quote
  #54  
Old 07-05-2010, 10:17 PM
srj srj is offline
Steel
 
Join Date: Jul 2009
Location: Manti, Utah
Posts: 24
Send a message via Skype™ to srj
Default Re: Engraving coining dies

I think the rules say that you have to make a knife or sword now and then.....Please!
You'll surely be an asset to this forum, Tom. All the best!
Reply With Quote
  #55  
Old 07-17-2010, 03:39 PM
belliott belliott is offline
Copper
 
Join Date: Jul 2010
Location: Lowell, Arkansas
Posts: 1
Default Re: Engraving coining dies

I'm new to this site and engraving, so I can not offer any help or advise. I am really excited to see another local on the forum.
Reply With Quote
  #56  
Old 04-10-2011, 11:04 AM
Cassie Cassie is offline
Gold
 
Join Date: Jan 2009
Location: northern NM (Nambe)
Posts: 165
Default Re: Engraving coining dies

Tom, I just came across this thread. It's fascinating.
I love the idea of making fantasy coins.

Thanks for taking time to do this tutorial.
cassie
Reply With Quote
  #57  
Old 05-29-2016, 06:38 PM
Tom Maringer's Avatar
Tom Maringer Tom Maringer is offline
Steel
 
Join Date: Mar 2008
Location: Springdale Arkansas
Posts: 48
Default Re: Engraving coining dies

I just wanted to bump this thread back up and see if there is any more interest in the engraving of coining dies. My son Woody has become quite good at it, though untrained, and has developed some innovative techniques that are rather different, yet work out well for what we're doing. Here are a couple of our flipping coins that Woody did using his techniques... which involves the use of a Gorton 3d pantomill to get a basic relief depression, and then the use of a variety of punches with smooth or rounded shapes to push the metal around, rather than engraving it away in shavings. We are working in annealed W-1 tool steel... which is soft as butter. After the die in sunk then of course we heat-treat the dies before using them.
Attached Images
File Type: jpg hell yeah fuck no_Side both.jpg (56.7 KB, 0 views)
File Type: jpg i win you lose side both.jpg (142.4 KB, 0 views)
Reply With Quote
  #58  
Old 06-01-2016, 06:42 AM
Jim Williams Jim Williams is offline
Copper
 
Join Date: Jan 2014
Location: Florida
Posts: 6
Default Re: Engraving coining dies

I have a Gorton GK-21 that I have used to engrave several small coining dies. I used O-1 for the small dies which are between 1/2 and 3/4 inch wide. For one, I made an epoxy cast of a Rapier Register Club badge from my LaGonda Rapier. I used a suitable pantograph ratio to have a tie tack sized finished product. I do not have a press, so I clamped the die against soft pure silver in my milling machine vise to get a good impression. I hand finished the pressings down to the outline of the impression. I did not make very many examples because of all the hand work involved. I can not post a photograph because we have recently moved and have not sorted out everything. I would very much like to have some sort of coining press, but the limitations imposed by advancing age may not permit such an acquisition. For the curious, the LaGonda Rapier was an attempt by LaGonda to offer a superior small car. They failed shortly after the Rapier's introduction, so very few were built.

Jim
Reply With Quote
  #59  
Old 06-03-2016, 01:00 AM
Roger B2 Roger B2 is offline
Platinum
 
Join Date: Apr 2007
Location: Adelaide, South Australia
Posts: 314
Default Re: Engraving coining dies

G'day Tom,

I know this is an old thread and in an earlier post you assumed that a lack of response also meant a lack of interest but I beg to differ.

Die engraving is one of those areas in the larger field of engraving that holds some interest for me and because of this thread I also found a discussion you were having on another coining site. I have found both to be very instructive and entertaining.

I spent much too short a time with Bryan Bridges in Tempe a few years ago and have since spent 6 months employed as an enameller with a badge maker who produced the dies for his products - this was my first experience of the larger scale presses that are required to produce these items. Unfortunately my time there ended and even though I offered to stay on with no wages in exchange for learning a bit more about the processes the offer was rejected.

I have since aquired a couple of Taylor Hobson pantographs and have them almost in a condition to use. I have also arranged to get the steel for a 20 ton press (I am only considering pieces about 15mm in diameter for now) so things are starting to move. The next thing will be to find a space large enough to set all of these things up.

Thanks again,
Roger
Reply With Quote
  #60  
Old 06-03-2016, 12:17 PM
Joe PAonessa Joe PAonessa is offline
Steel
 
Join Date: Mar 2008
Posts: 78
Default Re: Engraving coining dies

Woody's die work is impressive. Using the pantograph for metal removal and then finishing up with punches is one of the ways Steve Adams showed me to make dies, although I found that I have better results with the slower cutting and scraping method. Attached are pics of three dies I just completed for the 150th anniversary of the nickel, and strikes over current nickels. Mostly mill work, just a little hand finishing work.




Reply With Quote
  #61  
Old 12-10-2016, 10:44 AM
brandvik's Avatar
brandvik brandvik is offline
Gold
 
Join Date: Dec 2006
Location: Texas, USA
Posts: 127
Default Re: Engraving coining dies

Joe, That is a beautiful set of dies to commemorate the nickel's 150th! I too have a great interest in die engraving.
Great Work!
__________________
Jim B.
http://www.horseshoeengraver.com
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 03:18 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.