Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,732. Welcome to our newest member, Miss Allison
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Who's Who - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 02-25-2018, 11:14 PM
drtyTshrt drtyTshrt is offline
Copper
 
Join Date: Feb 2018
Location: Outside Savannah Georgia
Posts: 8
Default New here

Hello.
I have learned I am an engraver and what I have been doing is graving for starters. I always thought I was engraving.
I am using an electrostylus but want to get more advanced.

I am glad I found this site and I will post more photos of what I have been doing now for a bit more than 3 years.

I just wanted to do a quick intro.


https://www.instagram.com/p/BZAF3lDhU9n/

Last edited by drtyTshrt; 02-25-2018 at 11:20 PM. Reason: Long story
Reply With Quote
  #2  
Old 02-26-2018, 01:09 AM
drtyTshrt drtyTshrt is offline
Copper
 
Join Date: Feb 2018
Location: Outside Savannah Georgia
Posts: 8
Default Re: New here

Some are just first lines.
Attached Images
File Type: jpg 20180130_145047.jpg (95.8 KB, 0 views)
File Type: jpg 20180130_145018.jpg (77.4 KB, 0 views)
File Type: jpg 20180130_145001.jpg (71.1 KB, 0 views)
File Type: jpg 20171030_212952.jpg (86.8 KB, 0 views)
Reply With Quote
  #3  
Old 02-26-2018, 10:14 AM
drtyTshrt drtyTshrt is offline
Copper
 
Join Date: Feb 2018
Location: Outside Savannah Georgia
Posts: 8
Default Re: New here

Maybe I did not learn what I thought I learned earlier.
I just found the glossary of engarving terms.
Attached Images
File Type: jpg 20171019_201247.jpg (94.4 KB, 0 views)
File Type: jpg 20171024_152057.jpg (95.9 KB, 0 views)
File Type: jpg 20171024_150848.jpg (76.9 KB, 0 views)
Reply With Quote
  #4  
Old 02-26-2018, 10:16 AM
drtyTshrt drtyTshrt is offline
Copper
 
Join Date: Feb 2018
Location: Outside Savannah Georgia
Posts: 8
Default Re: New here

Maybe I did not learn what I thought I learned earlier.
I just found the glossary of engarving terms.

I feel I am about to spend some money for some real tools.
Attached Images
File Type: jpg 20180226_123257.jpg (105.4 KB, 0 views)
Reply With Quote
  #5  
Old 02-26-2018, 11:08 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Re: New here

Hi drtyTshrt I like your forum name. My wife calls me that sometimes. !

Are you doing these with a rotary? It is pretty good if so with a rotary as I think it is much harder to make a clean long cut with the rotary tool and a single pointed graver. Once you figure out the graver cutting the groove it makes steads you from side to side from wiggle or shaking that happens with hand holding a rotary tool.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #6  
Old 02-26-2018, 12:39 PM
drtyTshrt drtyTshrt is offline
Copper
 
Join Date: Feb 2018
Location: Outside Savannah Georgia
Posts: 8
Default Re: New here

Quote:
Originally Posted by Steve Lindsay View Post
Hi drtyTshrt I like your forum name. My wife calls me that sometimes. !

Are you doing these with a rotary? It is pretty good if so with a rotary as I think it is much harder to make a clean long cut with the rotary tool and a single pointed graver. Once you figure out the graver cutting the groove it makes steads you from side to side from wiggle or shaking that happens with hand holding a rotary tool.
Thanks, there is a lot of history in that name. Do not Google it.

The steel cups and plexi mirror I did with an electric pulse engarver. Talk about wiggle and shake.

I have done a glass with a rotary and diamond bit.

I did not know how crude I was until I found this site.
All by hand, no vise, in my lap with naked eyes until I got the visor magnifier.
I have learned SO much in the past 24 hours thanks to this forum.

I plan to purchase some of your tools (palm airgraver) and I am wondering about the vise.
Do they have a built in turn table or is that a separate item?
Attached Images
File Type: jpg crude.jpg (51.3 KB, 0 views)
File Type: jpg Dale E.jpg (72.7 KB, 0 views)
Reply With Quote
  #7  
Old 04-04-2018, 02:26 PM
carl bleile's Avatar
carl bleile carl bleile is offline
Platinum
 
Join Date: Mar 2008
Location: cincinnati,ohio
Posts: 380
Default Re: New here

The engraving vices turn freely on their own.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 06:59 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.