View Single Post
  #2  
Old 11-06-2008, 02:34 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Smile Re: Video: Sharpening with flat template

Hi Vilts,
Thanks a lot for the demo on sharpening flats,the lettering demo was good and informative.
I also noticed the round 1&1/4 guide for the length of the graver rolled away on the table.If you take 400 grit wet and dry paper,place it on your white plastic,then hold the guide length wise in your thumb and first finger,run it on the 400 grit length wise,put a flat facet 3-5 mm,and one on the opposite side,stops the guide from rolling off the table.Then you can put it down lengthwise and it wont roll.I know somone who lost one.

Mohd
Reply With Quote