View Single Post
  #1  
Old 06-21-2008, 05:12 AM
phil phil is offline
Copper
 
Join Date: Apr 2008
Posts: 8
Default AirGraver uses 28 times less air volume (cfm)

Hi everyone. I have heard those of you that use lindsay airtools saying that you can run them on small C02 cylinders. I use the grs system with a 17 litre compressor yet even with no cutting ( the gravermach left on but me not cutting) the compressor is firing up every 5 mins or so. I have checked for leaks with soapy water to see if any bubbles develop but cant find any problems.I realize this site is lindsay oriented but i know many of you will have used both tools.Can you please tell me if this is normal. Thanks in advance for your help.
Reply With Quote