View Single Post
  #1  
Old 05-31-2017, 10:06 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Fast Resharpening Video

Click the arrow in middle of the image to start the video


Fast resharpening -- After initial sharpening of a graver blank only use the large template to touch up a broken or dull point. In other words, the small template is not needed or used for resharpening. The small template in the set is only for initially tapering and shaping a new graver blank. On my bench I only keep a 3000 diamond bench stone for touching up points. You can touch up that same graver point for years that way. I have a TW-Design high speed power hone in the other room with a rough lap on it for initially shaping a new blank, but from then on it is maintained with the 3000 diamond bench stone. Graver sharpener info page: www.AirGraver.com/sharpening.htm
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote