Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, AnicaLin
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > WaterCooler
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 12-14-2015, 10:09 PM
sailoralan sailoralan is offline
Steel
 
Join Date: Aug 2013
Location: key west florida, usa
Posts: 17
Default Well, I am now a shipwrecked sailor.

So as my username suggests, I am a sailor. My family and I have sailed 10,000 miles over 15 years. My family consists of my wife of 19 years, and my three daughters, 17, 15, 2.5, and myself.

This year we left Key West Florida for The Rio Dulce in Guatemala. Due to engine failure and other factors we found ourselves at anchor with a dangerous shore and an un forecast tropical storm. We snapped two 1.25 inch anchor lines and went over a very narrow barrier island and then onto a sandy beach. Our boat was stripped and we lost everything, including the boat and our savings.

We are now safely in Guatemala with my long retired father, preparing his large boat for a round the world journey. Which is why we were sailing here to begin with. Clearly, we are going to be okay.

I have been engraving coins for the last few years with tools I made. By the way, this forum and the many videos online have been invaluable. As it stands ALL of my tools are gone. I have a small budget to work with.

My question is do you think one would be better off investing in a cheap ball vise and making new gravers and punches by hand with commonly available stones or buying the deluxe coin engraving set and building a vise again?
Reply With Quote
  #2  
Old 12-18-2015, 01:57 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: Well, I am now a shipwrecked sailor.

Hi Sailoralan
We thank god you are all safe and well.And as the saying goes life goes on.
As and when you can I am sure you will replace the tools you lost for engraving.Go with what you can afford.You have the ability to to make the tools you made before
again ,the multi coin vise and an engraving vise once acquired are a long term asset,in my opinion.
SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.