Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,732. Welcome to our newest member, Miss Allison
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Who's Who - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 02-12-2020, 08:35 PM
SSVi SSVi is offline
Copper
 
Join Date: Feb 2020
Location: Idaho
Posts: 3
Default Hello from Idaho!

So I run the gun (mostly Glock) modding company SSVi, all polymer based work. I recently got into more wood engraving type stuff, especially where I use the same rotary tools. Well it turns out rotary tools don’t do the cleanest work on metal after a couple experiments on brass and steel so I’m going all in with a PC Classic. Mind you, the things I’m wanting to do aren’t the extremely fine detailed micro engravings, more your basic medieval, Celtic knotwork type of stuff on accent brass on sheaths or spear heads and whatnot.
I’m looking forward to learning a ton and seeing how well I can do with a proper engraving set up.
Here’s a couple examples of my typical style engraving on a couple Glocks.
Reply With Quote
  #2  
Old 02-12-2020, 08:41 PM
SSVi SSVi is offline
Copper
 
Join Date: Feb 2020
Location: Idaho
Posts: 3
Default Re: Hello from Idaho!

...and I hit submit when I was trying to post pictures...I’m screwing up already 🤣
Attached Images
File Type: jpg 78B6A3AA-FE21-40F2-A660-6789C228A08F.jpg (53.5 KB, 0 views)
File Type: jpg C250D0A1-7C5B-4811-A757-166B1F08BB27.jpg (120.3 KB, 0 views)
Reply With Quote
  #3  
Old 02-12-2020, 11:31 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Re: Hello from Idaho!

Cool with your gun company!
Good getting going with a Classic too.

You may have seen already but Tom Sterling has some some threads about Celtic drawing. He recently put together a book too.
https://www.engravingforum.com/showthread.php?t=13009
https://www.engravingforum.com/showthread.php?t=6047

The Classic does work for carving wood. There is a video in this thread: https://engravingforum.com/showthread.php?t=10367
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #4  
Old 02-14-2020, 10:22 AM
SSVi SSVi is offline
Copper
 
Join Date: Feb 2020
Location: Idaho
Posts: 3
Default Re: Hello from Idaho!

Quote:
Originally Posted by Steve Lindsay View Post
Cool with your gun company!
Good getting going with a Classic too.

You may have seen already but Tom Sterling has some some threads about Celtic drawing. He recently put together a book too.
https://www.engravingforum.com/showthread.php?t=13009
https://www.engravingforum.com/showthread.php?t=6047

The Classic does work for carving wood. There is a video in this thread: https://engravingforum.com/showthread.php?t=10367
Thank you! Do you still make any of those dies you showed off in that thread? I'd love to get a few!
Reply With Quote
  #5  
Old 02-14-2020, 01:57 PM
carl bleile's Avatar
carl bleile carl bleile is offline
Platinum
 
Join Date: Mar 2008
Location: cincinnati,ohio
Posts: 380
Default Re: Hello from Idaho!

you will find the air engraver a big help keep us posted
Reply With Quote
  #6  
Old 02-15-2020, 10:13 AM
DKanger DKanger is offline
Platinum
 
Join Date: Jun 2009
Location: West TN
Posts: 301
Default Re: Hello from Idaho!

NGraver sells a set of 5 gouges and chisels for wood engraving for his tool with a special adapter. I have no idea if they will fit other units.
__________________
Dave Kanger

Some men are wise, some are other wise.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 02:33 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.