Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,762. Welcome to our newest member, Katherine
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Lindsay AirGraver Info - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 08-28-2009, 07:31 AM
Tom_W Tom_W is offline
Steel
 
Join Date: Aug 2009
Location: United Kingdom
Posts: 37
Default Adapting a dual regulator for a rotary

In Steves notes on the Dual regulatory set-up he says "Auxiliary output for rotary handpiece pedal or PalmControl can be adapted to regulator on the right.
"

Does anybody have a photo of how they have done this?


Cheers

T
Reply With Quote
  #2  
Old 08-28-2009, 07:52 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Adapting a dual regulator for a rotary

Hi Tom, Here is an older photo of the setup.
Unscrew the barb fitting where the clear line from the airgraver foot pedal connects and screw in a y fitting there. Them reconnect the clear line and also the line to the rotary disc pedal. I have those Y fittings and send them out with the disc foot pedals. The disc pedals are $69 and listed with the airgraver pedals http://www.airgraver.com/Hand_Engrav...OOT%20CONTROLS
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #3  
Old 08-28-2009, 08:08 AM
Tom_W Tom_W is offline
Steel
 
Join Date: Aug 2009
Location: United Kingdom
Posts: 37
Default Re: Adapting a dual regulator for a rotary

Order incoming. No hurry needed to send it.
Reply With Quote
  #4  
Old 11-06-2023, 11:43 AM
texasbagpiper texasbagpiper is offline
Steel
 
Join Date: Jan 2013
Location: Texas
Posts: 18
Default Re: Adapting a dual regulator for a rotary

Is this still the way to do it? My regulator looks a bit different on the classic I just got. Their is only one gauge on mine.

Seth
Reply With Quote
  #5  
Old 11-06-2023, 12:06 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Adapting a dual regulator for a rotary

Hi Seth, They were updated 7 or so years ago with some needed improvements. Check the inside front cover of the manual, there is a photo there. Compared to the older model there is the mode selection to shut idle on/off with a switch. Also a built in auxiliary port for a rotary or connecting a palmcontrol. There is also that optional switch to turn on/off the auxiliary.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 09:36 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.