Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,732. Welcome to our newest member, Miss Allison
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Tutorials and Contests - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 03-09-2009, 05:07 AM
rbaptiste's Avatar
rbaptiste rbaptiste is offline
Platinum
 
Join Date: Nov 2007
Location: Modave (Belgium)
Posts: 1,133
Default Video ti to use the Roland Baptiste point

I make a little video but sorry for the bad quality.
http://www.youtube.com/watch?v=OyRYD9OjUUU



Steps:
1 you cut your line
2 you pass with my point in the two sens into the line. you must have a inclination of your tool, +- 35 to 45° angle
3 you put the gold wire
4 you polish

I hope it will be easier for you
__________________
http://rbaptiste.com
Reply With Quote
  #2  
Old 04-22-2010, 03:04 AM
Titian Titian is offline
Platinum
 
Join Date: Aug 2009
Posts: 318
Default Re: Video ti to use the Roland Baptiste point

Thank you very much.
From Thailand.
Reply With Quote
  #3  
Old 04-16-2012, 09:18 AM
MauiMay MauiMay is offline
Copper
 
Join Date: Apr 2012
Location: Bedford MA
Posts: 1
Default Re: Video ti to use the Roland Baptiste point

Hi, I'm new to this technique and would love a tools list. As far as I can tell you started with the amazing chisel that you sell a template for sharpening, and then next you used some sort of rounded (brass) tool to push it in, then some sort of scraper (insert more info here) then some sandpaper? Of a certain grit? then more sandpaper of a different grit? If it's not too much trouble, I'd love to know more so I can rationalize buying your template. Thanks so much!
Reply With Quote
  #4  
Old 04-16-2012, 10:15 AM
mrthe's Avatar
mrthe mrthe is offline
Platinum
 
Join Date: Oct 2010
Location: Spain
Posts: 1,217
Default Re: Video ti to use the Roland Baptiste point

This point is just Amazing,is a must to have for ever engraver, two days ago i had carved my last nickel a skull with a tooth in gold of 0,7 x 0,5 mm ,very very little,and i have can do in it the inlay undercuts using this point ,Icredible!



Thank you another time Roland!
__________________
www.mrthehobonickels.com
Reply With Quote
  #5  
Old 04-16-2012, 12:05 PM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: Video ti to use the Roland Baptiste point

Hi Mrthe,

I also find Rolands inlay point to be great, no doubts there !

The gold tooth nickel looks too good,great touch !


MO
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
  #6  
Old 11-16-2012, 05:34 AM
rbaptiste's Avatar
rbaptiste rbaptiste is offline
Platinum
 
Join Date: Nov 2007
Location: Modave (Belgium)
Posts: 1,133
Default Re: Video ti to use the Roland Baptiste point

Thanks for the comment
__________________
http://rbaptiste.com
Reply With Quote
  #7  
Old 12-11-2013, 09:21 PM
dlilazteca dlilazteca is offline
Gold
 
Join Date: May 2013
Location: texas
Posts: 138
Default Re: Video ti to use the Roland Baptiste point

Rolland

Does the yellow template you sell cut both the line and the undercut. Of course with two gravers my question you can shape both with the yellow template?
Reply With Quote
  #8  
Old 12-12-2013, 12:25 AM
mrthe's Avatar
mrthe mrthe is offline
Platinum
 
Join Date: Oct 2010
Location: Spain
Posts: 1,217
Default Re: Video ti to use the Roland Baptiste point

No just for undercuts use a square and a flat to prepare the setting
__________________
www.mrthehobonickels.com
Reply With Quote
  #9  
Old 11-05-2016, 08:09 AM
Brian Mears Brian Mears is offline
Copper
 
Join Date: Feb 2008
Posts: 5
Default Re: Video ti to use the Roland Baptiste point

I am new to inlays but I need to get started now. What is the best graver point for inlaying gold wire? Round, onglette, or? Then for the undercut the Baptiste...

thanks
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 01:13 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.